simplify(BNNBot): raw 10-bit binary encoding, clean output

- Replace population/thermometer/signed-thermometer encoding with simple 10-bit binary per value
- 5 values × 10 bits = 50 bits total (was 112)
- Each value normalized to 0-1023, then bit-extracted MSB-first
- Output is now just tick and raw binary string (no field labels, no debug log)
- Remove file logging entirely; stdout only

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

BNNBot_garage/src/BNNBot.nim

@@ -1,22 +1,13 @@
 # BNNBot — binary encoding data collector.
-# Radar lock on enemy, converts each scan to a 112-bit BinaryVector, logs + prints it.
+# Radar lock on enemy, converts each scan to a 50-bit BinaryVector, prints it.
 # No aiming, no firing — pure scan visualization for BNN research.
 
-import std/[math, strformat, os]
+import std/[math, os]
 import robocode_tankroyale_botapi
 import radar_lock/radar_lock as radar_lock
 import binary_encoding
 
 const botJsonPath = currentSourcePath().parentDir / "BNNBot.json"
-const scanLog = "/tmp/bnnbot_scan.log"
-
-proc appendLog(s: string) =
-  try:
-    let f = open(scanLog, fmAppend)
-    f.writeLine(s)
-    f.close()
-  except:
-    discard
 
 type
   BNNBot = ref object of Bot
@@ -53,10 +44,7 @@ method onScannedBot*(bot: BNNBot, e: ScannedBotEvent) =
     speed:    bot.speed,
   )
   let vec = encode(scan)
-  let fmt = formatBinary(vec)
+  echo $bot.tick, " ", formatBinary(vec)
-  let line = fmt"t={bot.tick} bear={bot.enemyBearing:.1f} dist={bot.distance:.0f} vel={bot.velocity:.2f} head={bot.heading:.1f} spd={bot.speed:.2f} pop={popcount(vec)} {fmt}"
-  echo line
-  appendLog(line)
 
 method onRoundStarted*(bot: BNNBot, e: RoundStartedEvent) =
   setAdjustGunForBodyTurn(true)
@@ -70,12 +58,7 @@ method onRoundStarted*(bot: BNNBot, e: RoundStartedEvent) =
   setTurnRate(0.0)
 
 method onGameStarted*(bot: BNNBot, e: GameStartedEventForBot) =
-  # Truncate log on game start
+  discard
-  try:
-    let f = open(scanLog, fmWrite)
-    f.close()
-  except:
-    discard
 
 method run*(bot: BNNBot) =
   while isRunning():

BNNBot_garage/src/binary_encoding.nim

@@ -1,127 +1,50 @@
-## binary_encoding — scan data → binary vector for BNNBot.
+## binary_encoding — scan data → binary vector (10-bit per value).
-## Encoding scheme:
-##   bearing/heading: population code (2 adjacent bits, triangular interpolation)
-##   distance/speed:  thermometer (all bits below threshold active)
-##   velocity:        signed thermometer (first half = negative, second half = positive)
 
 import std/math
 
 const
-  BEARING_BITS*  = 36      # 360° / 10° per bit
+  BITS_PER_VALUE* = 10
-  DISTANCE_BITS* = 16      # 0-2000 units, ~125 per bit (thermometer)
+  NUM_VALUES* = 5
-  VELOCITY_BITS* = 16      # -8 to +8, signed thermometer
+  TOTAL_BITS* = BITS_PER_VALUE * NUM_VALUES  # 50
-  HEADING_BITS*  = 36      # 360° / 10° per bit
-  SPEED_BITS*    = 8       # 0-8, 1 per bit (thermometer)
-  TOTAL_BITS*    = BEARING_BITS + DISTANCE_BITS + VELOCITY_BITS + HEADING_BITS + SPEED_BITS  # 112
 
 type
-  BinaryVector* = array[TOTAL_BITS, uint8]  # 0 or 1
+  BinaryVector* = array[TOTAL_BITS, uint8]
 
   ScanData* = object
-    bearing*:  float   # absolute bearing to enemy (degrees)
+    bearing*: float      # 0-360
-    distance*: float   # distance to enemy
+    distance*: float     # 0-2000
-    velocity*: float   # enemy velocity (negative = moving backward)
+    velocity*: float     # -8 to +8
-    heading*:  float   # enemy heading (degrees)
+    heading*: float      # 0-360
-    speed*:    float   # enemy speed (always positive)
+    speed*: float        # 0-8
 
-proc encodeBearing*(degrees: float, bits: int): seq[uint8] =
+proc toBits(value: float, minVal, maxVal: float): array[BITS_PER_VALUE, uint8] =
-  ## Population code: 2 adjacent bits active via triangular interpolation.
-  result = newSeq[uint8](bits)
-  let norm = ((degrees mod 360.0) + 360.0) mod 360.0
-  let bandWidth = 360.0 / float(bits)
-  let idx = norm / bandWidth
-  let lo = int(idx) mod bits
-  let hi = (lo + 1) mod bits
-  result[lo] = 1
-  result[hi] = 1
-
-proc encodeThermometer*(value, minVal, maxVal: float, bits: int): seq[uint8] =
-  ## Thermometer code: all bits below threshold are 1.
-  result = newSeq[uint8](bits)
   let clamped = clamp(value, minVal, maxVal)
   let norm = (clamped - minVal) / (maxVal - minVal)
-  let active = int(norm * float(bits))
+  let intVal = int(norm * 1023.0)  # 0-1023 fits in 10 bits
-  for i in 0..<active:
+  for i in 0..<BITS_PER_VALUE:
-    result[i] = 1
+    result[BITS_PER_VALUE - 1 - i] = uint8((intVal shr i) and 1)  # MSB first
-
-proc encodeSignedThermometer*(value, maxAbs: float, bits: int): seq[uint8] =
-  ## Signed thermometer: first half = negative magnitude, second half = positive magnitude.
-  result = newSeq[uint8](bits)
-  let halfBits = bits div 2
-  let clamped = clamp(value, -maxAbs, maxAbs)
-  if clamped >= 0:
-    let norm = clamped / maxAbs
-    let active = int(norm * float(halfBits))
-    for i in 0..<active:
-      result[halfBits + i] = 1
-  else:
-    let norm = -clamped / maxAbs
-    let active = int(norm * float(halfBits))
-    for i in countdown(halfBits - 1, halfBits - active):
-      result[i] = 1
 
 proc encode*(scan: ScanData): BinaryVector =
-  ## Encode full scan data into a 112-bit binary vector.
+  let parts = [
+    toBits(scan.bearing, 0.0, 360.0),
+    toBits(scan.distance, 0.0, 2000.0),
+    toBits(scan.velocity, -8.0, 8.0),
+    toBits(scan.heading, 0.0, 360.0),
+    toBits(scan.speed, 0.0, 8.0)
+  ]
   var offset = 0
-
+  for p in parts:
-  let bearBits = encodeBearing(scan.bearing, BEARING_BITS)
+    for i in 0..<BITS_PER_VALUE:
-  for i in 0..<BEARING_BITS:
+      result[offset + i] = p[i]
-    result[offset + i] = bearBits[i]
+    offset += BITS_PER_VALUE
-  offset += BEARING_BITS
-
-  let distBits = encodeThermometer(scan.distance, 0.0, 2000.0, DISTANCE_BITS)
-  for i in 0..<DISTANCE_BITS:
-    result[offset + i] = distBits[i]
-  offset += DISTANCE_BITS
-
-  let velBits = encodeSignedThermometer(scan.velocity, 8.0, VELOCITY_BITS)
-  for i in 0..<VELOCITY_BITS:
-    result[offset + i] = velBits[i]
-  offset += VELOCITY_BITS
-
-  let headBits = encodeBearing(scan.heading, HEADING_BITS)
-  for i in 0..<HEADING_BITS:
-    result[offset + i] = headBits[i]
-  offset += HEADING_BITS
-
-  let spdBits = encodeThermometer(scan.speed, 0.0, 8.0, SPEED_BITS)
-  for i in 0..<SPEED_BITS:
-    result[offset + i] = spdBits[i]
 
 proc formatBinary*(vec: BinaryVector): string =
-  ## Pretty-print binary vector with labeled sections.
+  for b in vec:
-  result = "BIN ["
+    result &= (if b == 1: "1" else: "0")
-  result &= "B:"
-  for i in 0..<BEARING_BITS:
-    result &= (if vec[i] == 1: "█" else: "░")
-  result &= "|"
-  var offset = BEARING_BITS
-  result &= "D:"
-  for i in 0..<DISTANCE_BITS:
-    result &= (if vec[offset + i] == 1: "█" else: "░")
-  result &= "|"
-  offset += DISTANCE_BITS
-  result &= "V:"
-  for i in 0..<VELOCITY_BITS:
-    result &= (if vec[offset + i] == 1: "█" else: "░")
-  result &= "|"
-  offset += VELOCITY_BITS
-  result &= "H:"
-  for i in 0..<HEADING_BITS:
-    result &= (if vec[offset + i] == 1: "█" else: "░")
-  result &= "|"
-  offset += HEADING_BITS
-  result &= "S:"
-  for i in 0..<SPEED_BITS:
-    result &= (if vec[offset + i] == 1: "█" else: "░")
-  result &= "]"
 
 proc popcount*(vec: BinaryVector): int =
-  ## Count active bits.
+  for b in vec: result += int(b)
-  for b in vec:
-    result += int(b)
 
 proc hammingDistance*(a, b: BinaryVector): int =
-  ## XOR + popcount.
   for i in 0..<TOTAL_BITS:
     result += int(a[i] xor b[i])